You Can Repair Your Canon SD Series Lens

Many people have questions about the restoration of the ceiling components on their Canon PowerShot SD series of cameras, so I have some instructions. Please let others know whether you found this article helpful.

Accessibility Kit for most Canon PowerShot SD-series cameras is a little difficult but not impossible, to replace themselves. You only need a little patience, a good shot of hands and a small tip screwdriver. We use dental hoes, they work very well!

To begin, you must use the camera and the enlargement of the lens, and open the battery cover to turn off the camera to hold and the destination. This makes it easier on the fence of the mounting of lenses.

The first part, the barrel in the car ring, he has a small part for insertion into the target. Some cameras are not, that is, if it is not in your device is not needed. Make sure that something is running when it was inserted, otherwise it is not well in the jam and the lens.

According to the sources and shutters. Put a spring in the individual components, there are few riders to hold office. They are small, they are difficult to achieve and when you fall, you can only say ... DO NOT fall on the carpet, ok? We only have the sources for the purchase, but please try not to lose it.

Insert the cover into the hole with the spring in which the free end is mounted, then something with a small tip (we use the dental pics!) Slowly take the loop in the spring and stick to his post.

To do this, with the shutters open, they will stay, if you are in the right. If anything pops off, everything. Try not to stretch the springs, they need to remain fixed for the assembly work.

Then gently press the lid barrier, it is a flat ring made of plastic. There are tabs on the cover of the fence, they are little slots on the ice, and it hangs. Caution, do not force anything too much or break, and the rooms, there is no space.

Now it is time to test your skills! Insert the battery (thumb) and press the power button! Did it work? He go SPROING * * and all parts flew in the room? Yes, I hope not, but I? War even when you're not alone.

Once he works smoothly:

Proceed to the double-sided tape on the fence to cover. VERY IMPORTANT: Peel, the yellow stripe on paper, but not from the side of the paper is dependent on the shape of the band! Abolition of the small part of the paper in the cassette due to drag himself back and remain. Bye bye tape!

The tabs at once on the edge, not adhere to the lens cover or not in the form and the target is the jam. Volume tab, in line with about 11, then turn and press the tabs that they do not whip.

Now put on your chrome or black lens cap, in accordance with the limit of small indentation at the base, you can see how easy it is running.

Start the camera back and admire your trav! Congratulations, you repair the unit for $ 20 and the good old Geek Squad She said it would be $ 200 and then 3-4 weeks for the repair.

Hmm ... I think that I am the beginning of something big here! =)